How to tie the zippers of your new blazer with this zigzag braid
Posted On July 6, 2021
If you’re like most people who grew up with a zippered blazer, you may have gotten used to wearing a single-breasted jacket and no jacket at all.
Then one day, you found out you could attach a zipper to a jacket and it was the perfect way to tie a zipper on your blazer.
Now you have two ways to tie your jacket to your blazers, and they both have their pros and cons.
Zipper tying is a great way to make your jacket look more formal, but it can be a little tricky.
This article will walk you through the steps of how to tie two zippers together, and also offer tips on how to keep your zipper looking professional.
How to Tie Two Zippers Together Before you start, it’s important to make sure you have your zippers ready to go.
To make your first zippering tutorial, you will need to get your jacket in the washing machine and turn the machine on.
Make sure the buttons on the jacket are fully opened.
When you open the buttons, you can see two loops that will hold the zippers together.
Make a note of which one you want to pull on the zipper.
To attach the zipper, fold the top edge of the zipper in half and push the zipper through the loops.
Pull the zipper tight on the front and back of the jacket, then attach it with the two loops you just made.
You can keep this process going until you are done with the zipper.
Next, you want your jacket’s zipper cut off at the top of the shoulder.
You will need a small, sharp knife or razor blade to do this.
Next up, you’ll want to cut off the zipper on the back of your jacket.
Pull it tight, then put the zipper back on your jacket, making sure you leave some slack in the front.
You should now have two layers of zippers on your zipperers.
The zippers will be attached to the jacket using the two zipperer loops you made earlier.
Now that you have the jacket’s zippers and zippers attached, you’re ready to make the zips.
Start by cutting off the zipped sections of your coat with the sharpest knife you can find.
You may have to use the knife you have in the closet, but be sure to use it properly.
Make your cut at the collar and the back, and make sure to do it with your knife, not a sharp object like a razor blade.
If you are wearing a long coat, make sure that you don’t have any excess fabric around the edges of your collar and back.
The back of a longcoat is where most of the weight is, so the jacket should be tight and you should have no excess fabric hanging around the back.
Keep cutting and cutting until you get to the collar.
At this point, you should be able to see a small opening that you can push the jacket through.
Once you have that closed, you are ready to attach the zipping loops.
Use a sharp knife to cut away the excess fabric that you see hanging around, then pull the zipper and zipper through the opening.
Repeat the process until you have made your two zips, then remove the jacket and attach it to your zipper-tied jacket.